Well, these monuments can erode. This tree, which has already been mentioned as a starting point, may not exist in 100 years. In addition, descriptions of boundaries and boundaries are usually very long and complicated. This is the most recent surveying system developed when dividing parcels of land. A flat map or cadastre marks the parcels of a subdivision and is recorded as a legal description. Lots are usually sold in one piece, and blocks have a group of adjacent lots, with blocks separated by roads throughout the subdivision. A condominium is a property; However, property rights are different from a single-family home. In a condominium, there is a common area that is shared by all condominium owners, and then the airspace of the condominium itself, which is individually owned. Metes and bounds is a term used to describe land boundaries and to establish all demarcation lines and their ends and angles. Metes are length or measurements, and limits or limits is a description that is often used when a high degree of accuracy is required.
It is more common in the description of non-divisible properties or large tracts of land, while the identification of properties and blocks is usually associated with subdivisions. Sometimes both are used. Cardinal capes are usually expressed in numbers. For example, north is a direction of 0 and west is a direction of 270, meaning northwest would be 315 degrees or in N45W survey systems. N44W is slightly further north and less to the west than N45W. If you need more precision, you can also use fractions of degrees. A sixtieth of a degree is called a minute. If the description of the instructions in minutes is not precise enough, you can also further divide the minutes into seconds so that there are 60 seconds in one minute.
Some of the terminology used with the Metes and Bounds description includes monuments, landmarks and starting point (POB). The legal description usually includes the word condominium or condominium as well as the lot number, property number, unit number and building number. A real property parcel where there is an undivided common interest in a portion of the property, associated with a separate spatial interest called a unit, whose boundaries are described on a final registered map, parcel map or condominium plan. In legal documents such as lien, deed, trust deed, mortgage, and purchase agreement, courts require an accurate description of a property`s location. This is not just the address of the property, but a legal description. There is more than one type of legal description you need to know for your exam. The Métis and boundary method for legal land description is discussed in this article. Constituency boundaries continue to be described through the use of metes and bounds, even in jurisdictions where terrestrial platforms are not otherwise based on metes and bounds. Such mapping typically uses roads and their intersections to define the boundaries of electoral districts, constituencies, etc. Example: «From the intersection of Main Street and John Doe Boulevard, thence north to ABC Drive, thence generally east along the middle of ABC Drive to thence to 123rd Street. Since each unit is about the interior of a unit, height can be part of the description, and if basements, ground floors, second floors or upper floors are affected, the description can include a reference to an official date or a specific area used to measure heights. The space is described in the condominium plan, the final registered map or the parcel map.
Let us say that a landowner owns a large piece of land and wants to divide it into small residential lots. The metes and bounds, or system of government, has been used to describe the country. The plot that our owner wants to share is a quarter or 40 hectares. The legal description appears in several places in real estate documents, such as purchase agreements, mortgage documents, deeds, title information, etc. It is used to track a property`s history to ensure a clear title, and lenders need it to make sure they have the right collateral for the loan. Wherever it appears, it must be carefully checked to confirm that the description is correct. A legal description of the land used for the land, indicating the number, plot and block in a specific subdivision. There are three common methods of describing real estate: boundaries and boundaries, government surveying, and lot and block. Here`s an overview of how they work. The Metes and Bounds survey system has existed since the original American colonies, and is the oldest surveying system.
Today, the tools are more technical and accurate, with the use of computers, satellites and global positioning systems (GPS) to identify land. However, the purpose remains the same, to describe the dividing lines that define a property, with distances, directions and angles. The description of the Metes and Bounds is recorded on the subdivision map and documents. the method used to measure a parcel and determine its area; also the plan, which shows the dimensions, boundaries and area. A term used to describe land boundaries and to establish all boundary lines and their ends and angles. Metes (length or measurements) and boundary description are often used when a high degree of precision is required. Some courts have established a list of priorities to resolve conflicting descriptions of corners. In descending order, starting with the most reliable: (1) natural monuments, (2) man-made monuments such as roads and marked or surveyed lines, (3) adjacent areas or boundaries, (4) routes or directions, (5) distances, and (6) area or quantity. [4] Where is the starting point of the beginning? Well, that`s where monuments come in.